Webex Calling DECT Device Settings - Get the details of a specific DECT Network Base Station

Get the details of a specific DECT Network Base Station

Retrieve details of a specific base station in the DECT Network.

A DECT network supports 2 types of base stations, DECT DBS-110 Single-Cell and DECT DBS-210 Multi-Cell. A DECT DBS-110 allows up to 30 lines of registration and supports 1 base station only. A DECT DBS-210 can have up to 254 base stations and supports up to 1000 lines of registration.

This API requires a full or read-only administrator auth token with a scope of spark-admin:telephony_config_read.

GET/v1/telephony/config/locations/{locationId}/dectNetworks/{dectNetworkId}/baseStations/{baseStationId}

URI Parameters

locationId

stringrequired

Location containing the DECT network.

dectNetworkId

stringrequired

Retrieve details of a specific base station in the specified DECT network ID.

baseStationId

stringrequired

Retrieve details of the specific DECT base station ID.

Query Parameters

orgId

string

Organization containing the DECT network.

Response Properties

string

Unique identifier of the base station.

mac

string

Mac address of the DECT base station device.

handsets

array[HandsetsResponse]

List of handset and member line details registered with the base station.

string

Unique identifier of the DECT handset.

displayName

string

Display name of the DECT handset.

accessCode

string

Access code for the DECT handset.

lines

array[DECTHandsetLineResponse]

Details of the handset member lines registered with the base station. The maximum number of lines supported is 2.

memberId

string

Unique identifier of the handset line member.

firstName

string

First name of handset line member.

lastName

string

Last name of handset line member.

external

string

Primary number of handset line member.

extension

string

Extension of handset line member.

location

Location details of the handset line member.

string

Location identifier associated with the member.

name

string

Location name associated with the member.

memberType

MemberType

Indicates handset line member type.

PEOPLE

string

Indicates the associated member is a person.

PLACE

string

Indicates the associated member is a workspace.

VIRTUAL_LINE

string

Indicates the associated member is a virtual profile.

Response Codes

The list below describes the common success and error responses you should expect from the API.

Code	Status	Description
200	OK	Successful request with body content.
201	Created	The request has succeeded and has led to the creation of a resource.
202	Accepted	The request has been accepted for processing.
204	No Content	Successful request without body content.
400	Bad Request	The request was invalid or cannot be otherwise served. An accompanying error message will explain further.
401	Unauthorized	Authentication credentials were missing or incorrect.
403	Forbidden	The request is understood, but it has been refused or access is not allowed.
404	Not Found	The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method.
405	Method Not Allowed	The request was made to a resource using an HTTP request method that is not supported.
409	Conflict	The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once.
410	Gone	The requested resource is no longer available.
415	Unsupported Media Type	The request was made to a resource without specifying a media type or used a media type that is not supported.
423	Locked	The requested resource is temporarily unavailable. A `Retry-After` header may be present that specifies how many seconds you need to wait before attempting the request again.
428	Precondition Required	File(s) cannot be scanned for malware and need to be force downloaded.
429	Too Many Requests	Too many requests have been sent in a given amount of time and the request has been rate limited. A `Retry-After` header should be present that specifies how many seconds you need to wait before a successful request can be made.
500	Internal Server Error	Something went wrong on the server. If the issue persists, feel free to contact the Webex Developer Support team.
502	Bad Gateway	The server received an invalid response from an upstream server while processing the request. Try again later.
503	Service Unavailable	Server is overloaded with requests. Try again later.
504	Gateway Timeout	An upstream server failed to respond on time. If your query uses `max` parameter, please try to reduce it.

GET

/v1/telephony/config/locations//dectNetworks//baseStations/{?orgId}

Header

Authorization
Use personal access token
Bearer
This limited-duration personal access token is hidden for your security.

Query Parameters

orgId
string
Organization containing the DECT network.

https://webexapis.com/v1/telephony/config/locations/Y2lzY29zcGFyazovL3VzL0xPQ0FUSU9OLzEyMzQ1/dectNetworks/Y2lzY29zcGFyazovL3VzL0RFQ1RfREVWX05FVC9iNWNhZWVkMi0yYTJlLTQ0NTQtYjU3Yy1jMWFhMTk4MTBiMDk/baseStations/Y2lzY29zcGFyazovL3VzL0RFQ1RfREVWX1NUQVRJT04vYzRhMTQxN2ItZGNiYi00MGMzLWE3YWQtNTY1MGZkZGRkNTNj?orgId=Y2lzY29zcGFyazovL3VzL09SR0FOSVpBVElPTi85NmFiYzJhYS0zZGNjLTExZTUtYTE1Mi1mZTM0ODE5Y2RjOWE

200 / OK

        {
            "id": "Y2lzY29zcGFyazovL3VzL1NDSU1fR1JPVVAvZjA2ZWRiOGMtMjMxNC00ZTcxLWIzNzgtZTdiMmQwNjk3OTliOjk2YWJjMmFhLTNkY2MtMTFlNS1hMTUyLWZlMzQ4MTljZGM5RG",
            "mac": "ABBD45856978",
            "handsets": [
                {
                    "id": "Y2lzY29zcGFyazovL3VzL1NDSU1fR1JPVVAvZjA2ZWRiOGMtMjMxNC00ZTcxLWIzNzgtZTdiMmQwNjk3OTliOjk2YWJjMmFhLTNkY2MtMTFlNS1hMTUyLWZlMzQ4MTljZGM5PO",
                    "displayName": "Inventory-handset-1",
                    "accessCode": "1555",
                    "lines": [
                        {
                            "memberId": "Y2lzY29zcGFyazovL3VzL1NDSU1fR1JPVVAvZjA2ZWRiOGMtMjMxNC00ZTcxLWIzNzgtZTdiMmQwNjk3OTliOjk2YWJjMmFhLTNkY2MtMTFlNS1hMTUyLWZlMzQ4MTljZGM5IU",
                            "firstName": "John",
                            "lastName": "Smith",
                            "external": "+12555533333",
                            "extension": "1551",
                            "location": {
                                "id": "Y2lzY29zcGFyazovL3VzL1NDSU1fR1JPVVAvZjA2ZWRiOGMtMjMxNC00ZTcxLWIzNzgtZTdiMmQwNjk3OTliOjk2YWJjMmFhLTNkY2MtMTFlNS1hMTUyLWZlMzQ4MTljZGM5LK",
                                "name": "Cisco-HQ"
                            },
                            "memberType": "PLACE"
                        }
                    ]
                }
            ]
        }